Seat Mii 2014 Owner's Manual page 40

38 Child safety
Overview of ISOFIX installation
In compliance with European Directive ECE 16, the following table details
the possible installations for ISOFIX child seats with the lower anchor points
in each of the vehicle seats.
The permitted body weight for the child seat or information regarding size A
to G is indicated on the label on child seats with "universal" or "semi-uni-
versal" certification.
Group 0:
up to 10
kg
facing
back-
wards
Installation di-
(in the di-
rection
rection
opposite
to travel)
Size F G
installed on
Seat does not have anchor points, it is not possible to se-
front passen-
ger seat
Installed on
the rear seat IL-SU
bench
IL-SU: seat suitable for installing an ISOFIX child seat with certification
"semi-universal", take note of the list of vehicles of the manufacturer of the
child seat.
IUF: seat suitable for the installation of an ISOFIX child seat with certifica-
tion "universal" and with Top Tether retaining strap.
Group (weight category)
Group 0: up to
10 kg
Group 1: 9 to 18 kg
Group 0+: up to
13 kg
facing back- facing back-
facing for-
wards wards
(in the direction (in the direc-
(in the direc-
opposite to tion opposite
tion of travel)
travel) to travel)
C D E C D A
cure with ISOFIX
IL-SU IL-SU IUF/IL-SU
Child seats with rigid mounting
For the installation of a child seat with rigid mounting auxiliary introduction
elements can be used. Using auxiliary introduction elements facilitates in-
stallation and protects upholstery. Auxiliary introduction elements form part
of the supply volume of the child seat or can be acquired at a SEAT dealer-
ship. If necessary, auxiliary introduction elements are inserted in both an-
chor points of the vehicle ⇒ .
● Observe the manufacturer's instructions when installing and removing
the child seat ⇒
● Press the child seat onto the retaining rings
the arrow. The child seat must be safely engaged and click audibly into
place.
● Pull on both sides of the child seat to ensure that it is secure.
Child seat with adjustable retaining straps
● Observe the manufacturer's instructions when installing and removing
wards
the child seat ⇒
● Place the child seat on the seat cushion and attach the retaining strap
hooks to the retaining rings
● Tighten the straps evenly using the corresponding adjustment device.
B B1
The child seat must sit flush against the vehicle seat.
● Pull on both sides of the child seat to ensure that it is secure.
WARNING
The lower anchor points for child seats do not include rings. Only secure
booster seats to lower anchor points.
.
⇒ F ig. 24
.
⇒ F ig.
24.
in the direction of
