Table of Contents
Advertisement
CAUTION
● To avoid making permanent marks in the padding, remove the auxiliary
introduction elements from the anchor points when the child seat is not in-
stalled in the vehicle anchor points.
● To prevent damage being done to the upholstery, the padding or the
auxiliary introduction elements, always remove the auxiliary introduction el-
ements from the anchor points before folding the rear seat bench.
Securing a child seat using a Top Tether retaining strap
● Observe the manufacturer's instructions when installing and removing
the child seat ⇒
.
● Unlock the seat backrest and fold it gently forward ⇒ p age 78.
● Remove the head restraints situated behind the child seat and store
them safely in the vehicle ⇒ p age 9.
● Guide the upper retaining strap from of the child seat back to the lug-
gage compartment, feeding it through the seat backrest and the rear shelf.
● Fold back the seat backrest and push it firmly into the lock.
● Secure the child seat to the lower anchor points ⇒ p age 37
Safety
Fig. 25 Example of an
upper retaining strap
connected.
Operation
● Hook the upper retaining strap in the luggage compartment, to the cor-
⇒ F ig.
responding retaining ring
● Tighten the strap so that the top of the child seat rests on the seat back-
rest.
WARNING
Child seats with lower anchor points and with an upper retaining strap
must be installed in line with the manufacturer's instructions. Failure to
comply could result in severe injuries.
● Always secure just one retaining strap to a child seat with the lug-
gage compartment retaining ring.
● Always use the correct retaining rings for the retaining strap.
● Never secure the retaining strap to a retainer.
Advice
Child safety
25.
Technical specifications
39
Advertisement
Table of Contents
