Table of Contents
Advertisement
Complete operations only in the sequence given:
A
Fig. 146
Dipped beam and main
beam headlights
1.
Remove the bulb con-
nector H4. Remove the
rubber cover using the
tabs.
2.
Press the retaining clip
downwards in the
D
direction of the arrow,
and unclip sideways
and remove it.
Remove the bulb from the holder. If necessary, press the lock on
3.
4.
Replace the faulty bulb by a new identical bulb.
Insert the bulb, return
it to its position and
5.
insert the retaining
clip
.
D
Fit the rubber cover
and check that is cor-
6.
rectly in position. In-
sert the connector to
the bulb H4.
Note
The images show the left hand headlight from behind. The structure of the
right hand side headlight is symmetric.
Safety
B
Side light and day-
Turn signals (front)
time driving light
Open the bonnet ⇒ p age 171.
Turn the bulb holder in an anticlockwise
direction as far as it will go and remove
it, along with the bulb, pulling back-
wards.
the bulb holder.
Insert the bulb
Insert the bulb
holder in the head-
holder in the head-
light and turn it
light and turn it
clockwise as far as
clockwise as far as
the stop.
the stop.
Operation
To replace the front bumper bulbs
C
Advice
If and when
Fig. 147 In the front
right wheel arch: remove
the retaining screws (ar-
rows) and take out the
expansive rivet
.
A
Fig. 148 Changing the
bulbs in the headlights
Technical specifications
217
Advertisement
Table of Contents
