Table of Contents
Advertisement
Category
Group 0
Up to 10 kg
Category 0+
Up to 13 kg
Group 1
9 to 18 kg
Group 2
15 to 25 kg
Group 3
22 to 36 kg
Securing the child seat using the seat belt
● Please read and observe the child seat manufacturer's handling instruc-
tions.
● Move the front passenger seat, or the rear seat bench back as far as pos-
sible and, in the case of an adjustable backrest, set it in the upright posi-
tion ⇒ p age 9.
● Positioning the child seat on the seat according to the manufacturer's
instructions.
● Fasten the seat belt or pass it around the child seat structure in the man-
ner described in the manufacturer's instructions.
● Make sure the seat belt is not twisted.
● Insert the latch plate into the buckle for the appropriate seat and push it
down until it is securely locked with an audible click.
● Ensure that the upper belt web lies tightly on the child seat.
● Pull the belt (it must be no longer possible to pull the lower belt web-
bing out).
Removing the child seat
The seat belt must not be unfastened until the vehicle has come to a stand-
still ⇒
.
Safety
Front passenger
Rear seats
u
u
u
u
u
u
u
u
u
u
Operation
● Press the red button on the buckle. The latch plate is released from the
buckle.
● Guide the belt back by hand so that it rolls up easily and the trim will not
be damaged.
● Remove the child seat from the vehicle.
WARNING
Unbuckling the seat belt while the vehicle is in motion can cause severe
or fatal injuries in the event of an accident or sudden braking.
● The seat belt must not be unfastened until the vehicle has come to a
standstill.
Securing the child seat using the lower anchor points
(ISOFIX)
Each seat of the rear seat bench has two retainers named lower anchor
points.
Advice
Child safety
Fig. 24 On the vehicle
seat: Identification var-
iants of the anchor points
for child seats
Technical specifications
37
Advertisement
Table of Contents
