Table of Contents
Advertisement
Warning and control lamps
Flashes Possible cause
Engine oil pressure
too low.
WARNING
Observe the safety warnings ⇒
page 48.
Engine oil specifications
Replacement engine oil must strictly comply with the specifications.
The correct oil must be used to ensure the correct operation and long serv-
ice life of the engine. The engine comes with a high-quality multigrade oil
that can generally be used all year round.
Only use an engine oil that complies to SEAT standards whenever possible
⇒ . Only refill engine oil using approved engine oil in accordance with the
corresponding SEAT standard (⇒ t able on page 175). All oils indicated are
synthetic multigrade oils.
Engine oils are being continuously further developed. Technical Services
are permanently informed of any modifications. SEAT therefore recommends
that you have the engine oil changed by a Technical Service.
Safety
Solution
Stop the vehicle!
Switch off the engine. Check the engine oil
level, and if necessary, refill with
⇒ p age 176.
engine oil - If the warning indicator flashes
although the oil level is correct, do not
continue driving or leave the engine run-
ning. Otherwise, the engine could be dam-
aged. Seek specialist assistance.
in Control and warning lamps on
Operation
Engines
44 kW - 55 kW Petrol engines
CAUTION
● Only use engine oils whose specifications are expressly approved by
SEAT. The use of any other type of oil could cause engine damage!
● No additives should be used with engine oil. Any damage caused by the
use of such additives would not be covered by the factory warranty.
Advice
Checking and refilling levels
Specifications of engine oil with a
service dependent on time/dis-
tance travelled
VW 504 00, VW 502 00
Technical specifications
175
Advertisement
Table of Contents
