Table of Contents
Advertisement
218
If and when
Complete operations only in the sequence given:
Unscrew the 2 retaining screws of the wheel arch trim
1.
(arrows) with the screwdriver from the vehicle took kit ⇒ p age 211.
Unscrew the expansive rivet in the lower front part of the wheel arch
2.
trim
with the screwdriver from the vehicle tool kit and complete-
A
ly remove it ⇒ p age 211.
3.
Carefully fold the wheel arch trim to the side.
4.
Release the connector
Turn the bulb holder
5.
anticlockwise direction as far as it will go and remove it, along with
the bulb, pulling backwards.
6.
Replace the faulty bulb by a new identical bulb.
Insert the bulb holder in the headlight and turn it clockwise as far
7.
as the stop.
Plug the connector
8.
dibly click into place.
9.
Replace the wheel arch trim into its position.
Place the expansive rivet in the wheel arch trim and bumper and
10.
press it completely inwards
Securely screw the 2 retaining screws
11.
screwdriver.
⇒ F ig. 147
⇒ F ig. 148
and remove it.
1
⇒ F ig. 148
in the direction of the arrow, in an
into the bulb holder. The connector must au-
1
⇒ F ig. 147
.
A
⇒ F ig. 147
(arrows) with a
Advertisement
Table of Contents
