Seat Mii 2014 Owner's Manual page 110

108 Driving
If it
lights Possible cause
up:
Place the automatic gearbox
lever in the position  and do
not press the brake pedal.
Together with the yellow con-
trol lamp for the temperature
of the transmission : the

automatic gearbox overheats.
Together with the turn signal
display in the instrument pan-
el display: the automatic
gearbox lever is not in the po-
sition , indication to start the
engine.
Solution
Press the brake pedal to select a
gear range.
Press brake pedal and let the
transmission cool. Avoid pressing
the accelerator. When the control
lamp does not light up, find the
nearest specialised workshop
and have the automatic gearbox
checked.
Move the gearbox lever to the po-
sition  and start the engine.
If
flash- Possible cause
ing
An automatic gearbox in the
vehicle does not guarantee

that the vehicle will not roll
away.
In the instrument panel dis-
play, in addition to the control
lamp requesting the brake
pedal to be pressed : indica-
tion to start the engine.
On the instrument panel dis-
play: whilst driving in a for-

ward direction, try to move the
automatic gearbox lever to the
position .
On the instrument panel dis-
play: The automatic gearbox
lever was placed in the posi-
tion  or , but the brake pedal
was not pressed.
When switching on the ignition some warning and control lamps light up for
a short time to check operation. They will switch off after a few seconds.
Pedals
Do not allow floor mats or other objects to obstruct the free passage of the
pedals.
Floor mats should leave the pedal area free and unobstructed and be cor-
rectly secured in the footwell zone.
Solution
Apply the handbrake.
Move the gearbox lever to the po-
sition  and start the engine.
Stop the vehicle and move the
gearbox lever to the position  in
order to subsequently change to
the position .
Press the brake pedal, move the
gearbox lever to the position ,
and subsequently to the required
position  or .

