Chapter 4 Ecg Sampling; Initial Configuration; Entering Patient Information - EDAN SE-1515 User Manual

SE-1515 PC ECG User Manual

Chapter 4 ECG Sampling

Plug in the right sentinel, and double-click
screen will be displayed as follows:

4.1 Initial Configuration

When the software is started the first time after installation, an Initial Setting window will be
displayed, and you can configure parameters such as the hospital name, lead mode, and sequence.
NOTE: If you need to reinstall the software, reinstall it under the original directory.
Otherwise, you will have to reconfigure it.

4.2 Entering Patient Information

You can enter the patient information with the following two ways:
1. New Patient
Click New Patient on the main screen (Figure 4-1), and the New Patient window will be
displayed as follows:
on the screen to start the software. The main
Figure 4-1 Main screen
- 37 -
ECG Sampling