Entering Patient Information By Using A Bar Code Reader; Retrieve Patient Information; Selecting The Ecg Sampling Type - EDAN SE-1515 User Manual

SE-1515 PC ECG User Manual

4.2.2 Entering Patient Information by Using a Bar Code Reader

The procedure is as follows:
1. Configure the bar code
For more detailed information about configuring the bar code, please contact the
manufacturer or the local distributor.
NOTE: If the two-dimensional bar code reader is used, you should install Symbol
COM Port Emulation Driver manually. For details, please refer to SE-1515 PC
ECG Installation Guide.
2. Connect the USB bar code reader to the computer.
3. Start the SE-1515 PC ECG software.
4. Use the barcode reader to scan the code:
One-dimensional: Place the cursor on the Patient ID in the New Patient window or order
screen and then scan the barcode.
Two-dimensional: On the Archives screen, scan the barcode and the New Patient window
will be displayed with the patient information filled out automatically; or place the cursor on
the patient ID in the New Patient window before scanning.
NOTE:
1. Only the USB bar code
2. The USB bar code

4.2.3 Retrieve Patient Information

On the Archives screen, you can use the following two methods to retrieve the information of a
patient recorded before:
Select an order record and click Exam.; or select an examination record, and click Retrieve.

4.3 Selecting the ECG Sampling Type

When creating a new patient record, you can configure the ECG sampling type in the New
Patient window.
When placing a new order, you can select the ECG sampling type in the New Order area.
Options provided are Resting ECG, Exercise ECG, VCG/SAECG, and HRV.
reader
recommended by the manufacturer can be used.
reader
can only read the basic patient information.
- 39 -
ECG Sampling