Chapter 6 Printing Ecg Reports; Printing An Ecg Report; Auto Mode - EDAN SE-1200 Series User Manual

SE-1200 Series Electrocardiograph User Manual

Chapter 6 Printing ECG Reports

NOTE:
1. The working mode cannot be changed during the printing course. Stop printing
reports before changing the working mode.
2. Within three seconds after returning to the main screen, if you press the PRINT/STOP
key to print an ECG report in the auto quick mode or the manual mode, the recorder
will not respond.
3. If Print Out is set to Off in the Record Info Setup1 window, the ECG report can be
saved and transmitted, but cannot be printed out by pressing the PRINT/STOP key in
the auto and rhythm modes.
4. When the main screen is displayed, pressing the MODE key can select a working mode.

6.1 Printing an ECG Report

6.1.1 Auto Mode

The auto mode is the most common electrocardiograph usage and is applied to normal ECG test.
10s ECG data can be sampled, analyzed, and printed by pressing the PRINT/STOP key.
Operation Method:
1. Set Mode Options, Display Style, Preview, Sampling Mode, Record Style, Rhythm
Lead1/2/3, or Lead Sequence (Optional)
1) Select AUTO from the Mode Option list in the Work Mode Setup window.
2) Select a style from the Auto DispStyle list in the Work Mode Setup window.
3) Select a mode from the Sampling Mode list in the Work Mode Setup window.
4) Select On or Off from the Preview list box in the Work Mode Setup window.
5) Select a style from the Record Style list in the Record Info Setup window.
6) Select a lead from the Rhythm Lead1/2/3 list in the Lead Setup window.
7) Select a sequence from the Lead Sequence list in the Lead Setup window.
8) Press Enter to confirm.
- 51 -
Printing ECG Reports