EDAN SE-1515 User Manual page 57

SE-1515 PC ECG User Manual
4.4.3.2 Parameter Information Display

Heart rate display
Percentage of the current
HR against the target HR
NOTE:
1. If the background color of the current HR displayed is yellow, it indicates that the
current HR excesses the target value and should be paid attention to.
2. If the current HR excesses the target value, you should click Recovery to move
into the Recovery stage and observe the waveforms of in that stage.

BP display
When a BP monitor is connected to the system, the blood pressure display area is as follows:
The blood pressure data automatically refreshes regularly according to the configured blood
pressure sampling mode. You can click BP to manually refresh to the blood pressure.
The normal BP range can be configured in the Setting screen of the exercise ECG.
NOTE: If the background color of the blood pressure display area is yellow, it indicates
that the current systolic or diastolic is abnormal.

Information display area
If a treadmill is used, the information display area displays the total time, protocol, stage time,
stage, speed, slope, PVC/min, Max ST and Min ST, etc.
If an ergometer is used, the information display area displays the total time, protocol, stage time,
stage, exercise amount, PVC/min, Max ST and Min ST, etc.
4.4.3.3 Average Template
On the sampling screen for exercise ECG, you can click on Amplify or Template to observe the
average template of one or multiple waveforms.
The ST value and ST slope, displayed on the mean wave of each lead, refreshes every 10s. The 3
measurement lines on each mean wave shifts with that of the waveform simultaneously.
You can change the POSTj and the place of the measurement line to adjust the current ST and ST
slope for each lead. However, you cannot change the POSTj and the place of the measurement
line of the baseline ST.
Systolic
Target HR
Current HR
- 50 -
ECG Sampling
Diastolic