EDAN SE-1515 User Manual page 52

SE-1515 PC ECG User Manual
Print Setting
4.4.1.6 Function/Algorithm Setup
Click on Setting on the resting ECG sampling screen, and the System Setting window will be
displayed. In the System Setting window, click Function/Algorithm Setting to enter the
Function/Algorithm Setting screen.

The wave width can be set to 1, 2, 3, 4, or 5.
A larger means that the waveforms printed are wider.
value
NOTE: This parameter affects the printing only, the waveforms
displayed on the screen remains the same.

Sequence can be set to sequential or synchronous.
 If sequential is selected, the lead group will be sampled group by
group.
 If synchronous is selected, all the leads will be sampled at the
same time.

Paper Orientation can be set to Landscape or Portrait.

Paper Size can be set to A4 or Letter.

Baseline Adjustment can be set to OFF, Auto, or Horizontal.
 If it is set to Horizontal, the baseline for leads on the same level is
in the same line.
 If it is set to Auto, the system automatically adjusts the baseline
for each lead group.
 If it is set to OFF, the system adjusts the baseline for each lead
group to an average value.

If Auto Gain Control (AGC) is selected, the gain will be adjusted
automatically, and the Baseline Adjustment is set to Horizontal
automatically.

If the printing color is set to color, the background grid will be printed
in color.
NOTE: If the printing color is set to color, but a black-and-white
printer is used, the report printed will be illegible.

If Print after diagnosis is selected, the system automatically prints the
report after the diagnosis is complete.
- 45 -
ECG Sampling