EDAN SE-1515 User Manual page 67

SE-1515 PC ECG User Manual
 DUKE score
It is automatically calculated by the system and is used to evaluate the follow-up
conditions after the exercise test.
DUKE Value
>5
-10~5
<-10
NOTE: The DUKE value cannot be changed manually, but it automatically
changes after you manually change the Max ST Change or Pectoralgia
Type.
 HR
Only integers from 0 to 350 are allowed.
 BP
When in the unit of mmHg, only integers from 0 to 350 are allowed.
When in the unit of Kpa, the value must be a decimal fraction from 0-46.9, and only one
decimal digit is allowed.
 Max Workload
The value must be a decimal fraction from 0 to 100.0, and only one decimal digit is
allowed.
 Max ST/Min ST
Max ST: The value must be a decimal fraction from 0 to 0.80, and two decimal digits are
allowed.
Min ST: The value must be a decimal fraction from -0.80 to 0.80, and two decimal digits
are allowed.
 Max ST Change
The value must be a decimal fraction from 0 to 0.5, and only one decimal digit is
allowed.
3. Diagnosis
Every time the sampling for exercise ECG is complete, you can fill out the diagnosis result
manually. The diagnosis result must be within 500 characters. When filling out the diagnosis
result, you can use a common diagnosis template in the Glossary, or you can customize the
glossary.
4. Diagnosis History
Click on History and you can view all the history diagnosis records of the current patient.
Risk Level
Low
Medium
High
- 60 -
ECG Analysis