Navigate In Circle Mode; Start Circle Mode At The Vessel Position; Navigating In Circle Mode At The Boat Position - Humminbird i-PILOT LINK Operation Manual

Navigate in Circle Mode

You can start Circle Mode at the vessel position or the cursor position. During Circle Mode navigation, you can also use Cruise Control
(see Cruise Control).

Start Circle Mode at the Vessel Position

1. Press the GO TO key.
2. Select Circle. Press the RIGHT Cursor key.
Adjust the Radius (optional): Select Radius. Press the RIGHT or LEFT Cursor keys to adjust the setting.
3. Select Clockwise or Counterclockwise. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat when Circle mode is engaged. If the boat does not move, confirm the prop is turned on in the menu system
(see Propeller Controls).

Navigating in Circle Mode at the Boat Position

Circle Mode navigation direction and radius setting
Open the
Go To Menu
track
(red line)
center point
planned
circle