Navigate To A Saved Spot-Lock; Engage Spot-Lock At A Waypoint Position; Engaging Spot-Lock At The Selected Waypoint - Humminbird i-PILOT LINK Operation Manual

Navigate to a Saved Spot-Lock

If a saved Spot-Lock is within 1/4 mile of the boat position, you can start navigation towards it. Spot-Lock will engage automatically
when the boat reaches the destination Spot-Lock. See the illustration Navigating to a Spot-Lock at the Cursor Position.
1. Use the Cursor Control key to move the cursor to a saved Spot-Lock on the Chart View.
2. Press the GO TO key.
3. Select Go To Position.
4. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Engage Spot-Lock at a Waypoint Position

If a saved waypoint is within 1/4 mile of the boat position, you can navigate to it and engage Spot-Lock automatically. If the waypoint
is more than 1/4 mile away, navigation will not start. To change a waypoint to a Spot-Lock, see the Waypoints section.
1. Use the Cursor Control key to select a waypoint on the Chart View.
2. Press the MENU key.
3. Select the Waypoint name (extended menu). Press the RIGHT Cursor key.
4. Select Spot-Lock.
5. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Engaging Spot-Lock at the Selected Waypoint