Update The Control Head Software; Restart The System - Humminbird i-PILOT LINK Operation Manual

3

| Update the Control Head Software

Use the following instructions to download software updates from your account.
1. Install a formatted microSD or SD card into the slot on your PC.
For card compatibility type, see your control head operations manual.
2. Download: Select the My Equipment page. The available software updates are listed as Downloads under each registered
product.
• Under Downloads, click the file name.
• Read the instructions in the dialog box and select Download.
• Follow the on-screen prompts to save the software file to the microSD or SD card.
3. Install the microSD or SD card with the updated software file into the control head card slot.
4. Power On: The control head will recognize the new software and run through a series of prompts to confirm the software
installation.
4

| Restart the System

1. Entire System Restart: After all software has been updated, power off all control heads and connected equipment. Wait 10
seconds, and then power on all equipment.
2. Cycle power to the trolling motor to regain proper motor control.