Humminbird i-PILOT LINK Operation Manual page 65

2
| Start Follow the Contour Navigation
Follow the Contour
You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected contour.
NOTE: If you cannot select a contour because it is displayed under AutoChart Live or Bottom Layer, see Follow Bottom Hardness
or Vegetation: Hide layers.
1. Use the Cursor Control key to select a position on a contour line.
2. Press the GO TO key.
3. Select Follow the Contour. Press the RIGHT Cursor key.
4. Select a navigation direction from the submenu. Press the RIGHT Cursor key.
The navigation direction is previewed in orange or blue on the Chart View.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the contour. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Selecting a Direction for Follow the Contour
direction preview
Select a Contour Line
direction preview
Open the GO TO
Menu
selected
direction
offset
setting