Cancel I-Pilot Link Navigation (Disengage); Mark I-Pilot Link Navigation - Humminbird i-PILOT LINK Operation Manual

3. If Prop Auto On is turned on, the propeller will start navigation automatically.
If Prop Auto On is turned off, turn on the propeller manually. Press the POWER key. Select Prop > On (For more information,
see Propeller Controls).
4. When the destination is reached, i-Pilot will enter the mode of navigation set in the Arrival Mode. See Configure i-Pilot with
the Control Head: Set the Arrival Mode.

Cancel i-Pilot Link Navigation (Disengage)

When i-Pilot Link navigation is in progress, whether with an iTrack, Spot-Lock, route, etc., you can cancel navigation at any time using
the following instructions.
WARNING! When you cancel i-Pilot Link navigation, be prepared to take manual control of the boat.
1. Press the GO TO key or the MENU key.
2. Select Cancel Navigation. Press the RIGHT Cursor key.
If AutoPilot was engaged, turn off the propeller separately: Press the POWER key. Select Prop > Off.

Mark i-Pilot Link Navigation

Use the MARK menu to save a waypoint, save a Spot-Lock, or record an iTrack. This section is an overview. Each navigation mode
is detailed throughout this manual.
1. Press the MARK key.
2. Select Waypoint, Spot-Lock, or Record iTrack.
3. Press the RIGHT Cursor key.