Navigate To A Waypoint Or Position; Add A Waypoint Target Or Trolling Grid - Humminbird 1100 Series Operation Manual

Delete a Waypoint: Open the Waypoint Management dialog box. Select a Waypoint, and press
the RIGHT Cursor key to open the Waypoint submenu. Select Delete, and press the RIGHT
Cursor key. To remove the Waypoint from the group, choose Selected. To delete the waypoint
from all groups, choose All Instances.

Navigate to a Waypoint or Position

Navigate to the Cursor Position: From the Chart View or Chart Combo Views, use the 4-WAY
Cursor Control key to move the cursor to a position or waypoint on the display. Press the GOTO
key.
Navigate to a Selected Waypoint: Press the GOTO key. Press the DOWN Cursor key to highlight
a waypoint from the saved waypoints list, and press the RIGHT Cursor key to start navigation.
NOTE: By repeating the previous instructions, you can add more waypoints to create a longer multi-
segment route.
Navigate to a Waypoint from the Waypoint Management Dialog Box: Open the Waypoint
Management dialog box. Select a Waypoint, and press the RIGHT Cursor key to open the
Waypoint submenu. Select Go To, and press the RIGHT Cursor key.
Skip a Waypoint: From the Navigation X-Press™ Menu, select Skip Next Waypoint, and press
the RIGHT Cursor key. If there is not another waypoint to skip to, navigation will be cancelled.
Cancel Navigation: From the Navigation X-Press™ Menu, select Cancel Navigation, and press
the RIGHT Cursor key. Canceling navigation removes the route and any waypoints created using
the GOTO key, but it does not remove any saved routes from memory. You will be prompted to
save the current route when you cancel navigation.

Add a Waypoint Target or Trolling Grid

The Waypoint Target shows a target consisting of concentric circles in various distance ranges
centered on the waypoint you choose. The Trolling Grid shows various distance ranges in grid
format from the waypoint you choose. The trolling grid can be used as a guide when trolling
around a waypoint.
Add a Waypoint Target: Open the Waypoint Management dialog box and select a Waypoint.
Press the RIGHT Cursor key, and select Target. Press the RIGHT Cursor key.
Add a Trolling Grid: Open the Waypoint Management dialog box and select a Waypoint. Press
the RIGHT Cursor key, and select Grid. Press the RIGHT Cursor key. The grid can also be rotated
to any heading by adjusting the Grid Rotation setting on the Navigation Main Menu.
Remove Target or Trolling Grid: Press the MENU key once, and choose Remove Target or
Remove Grid from the Navigation X-Press™ Menu, and press the RIGHT Cursor key.
NOTE: Only one waypoint can have either a target or a grid applied to it at one time. If you apply a
target or a grid to a new waypoint, the original waypoint will lose its target or grid.
Introduction to Navigation
84