Follow Bottom Hardness; Follow Vegetation - Humminbird i-PILOT LINK Operation Manual

Follow Bottom Hardness

You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected Bottom Hardness layer.
1. Use the Cursor Control key to select a position on the Bottom Hardness layer.
2. Press the GO TO key.
3. Select Follow Hardness. Press the RIGHT Cursor key.
4. Select a navigation direction from the submenu. Press the RIGHT Cursor key.
The navigation direction is previewed in orange or blue on the Chart View.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the bottom hardness layer. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Follow Vegetation

You can start i-Pilot Link navigation if the boat position is within 1/4 mile of the selected Vegetation layer.
1. Use the Cursor Control key to select a position on the Vegetation layer.
2. Press the GO TO key.
3. Select Follow Hardness. Press the RIGHT Cursor key.
4. Select a navigation direction from the submenu. Press the RIGHT Cursor key.
The navigation direction is previewed in orange or blue on the Chart View.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the vegetation layer. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Reverse Direction
1. During Follow Hardness or Follow Vegetation navigation, press the GO TO key.
2. Select Reverse Navigation. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat per the command. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Cancel Navigation (Disengage)
1. During Follow Hardness or Follow Vegetation navigation, press the GO TO key.
2. Select Cancel Navigation. Press the RIGHT Cursor key.