Humminbird i-PILOT LINK Operation Manual page 54

When Navigate to Start or Navigate to End is initiated, Link will navigate to the nearest track point. Once this nearest track point is
reached, it will then follow the track points in sequence back to either the Start Point or End Point, based on the selected mode.
Once the end or start track point is reached, i-Pilot Link automatically cancels the iTrack navigation. You can choose to have i-Pilot
Link transition to other modes by configuring the Arrival Mode (see Configure i-PIlot Link with the Control Head: Set the Arrival
Mode).
RECORDED iTRACK
NAVIGATE iTRACK
TOWARDS START POINT
NAVIGATE iTRACK
TOWARDS END POINT