I-Pilot Link Navigation Go To Menu Options; Install A Map Card (Optional) - Humminbird i-PILOT LINK Operation Manual

Off
Spot-Lock
AutoPilot
6

Install a Map Card (optional)

Use a Humminbird map card to provide detailed maps, depth contours, etc. on the chart views. To use Follow the Contour, an i-Pilot
Link-compatible Humminbird map card must be installed and selected as the map source.
Pilot Link Compatible Map Cards: Humminbird LakeMaster, LakeMaster PLUS, and AutoChart ZeroLine.
Install a compatible map card.
See your control head operations guide for installation details.
If the control head does not select the map source automatically, select the Main Menu > Chart tab > Map Source.
Select the installation location of the map card.
WARNING! Do not leave the SD slot cover open. The slot cover should always be closed to prevent water damage to the unit.

i-Pilot Link Navigation Go To Menu Options

Turns off the propeller and returns the i-Pilot Link to manual mode after navigation is finished.
You must be prepared to take manual control of the boat.
WARNING! If AutoPilot is the current navigation mode, you must turn off the propeller
separately. See Propeller Controls.
Creates and engages a Spot-Lock after navigation is finished. See Spot-Locks for details.
If the cursor is inactive, navigation begins in the direction of the boat's Course Over Ground
(COG) setting. If COG is not available, the current Heading (Hdg) is used.
If the cursor is active, navigation begins in the direction of the cursor's position using bearing
data from the active cursor.