Engage Spot-Lock At The Cursor Position; Navigating To A Spot-Lock At The Cursor Position - Humminbird i-PILOT LINK Operation Manual

Engage Spot-Lock at the Cursor Position

You can mark a Spot-Lock at a position within 1/4 mile from the boat. When the boat reaches the position, it will Spot-Lock until
you cancel navigation. If the position is more than 1/4 mile away, it will be marked as a Spot-Lock, but navigation will not start.
1. Use the Cursor Control key to move the cursor to a position or waypoint on the Chart View.
2. Press the GO TO key.
3. Select Spot-Lock > At Cursor.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the Spot-Lock position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Navigating to a Spot-Lock at the Cursor Position

Spot-Lock navigation mode
Move the Cursor
saved Spot-Lock
selected Spot-Lock with cursor
Open the GO TO
Menu