Backtrack; Adjust The Backtrack Distance; Start Backtrack Navigation - Humminbird i-PILOT LINK Operation Manual

B T
ACK RACK
Traditional Humminbird tracks consist of a collection of track points that contain the boat's detailed position history at set intervals.
The Current Track shows the position history since the HELIX control head was powered on. You can clear the Current Track or save
it at any time. For more information about tracks, see your HELIX Operations Manual.
BackTrack starts i-Pilot Link navigation back through the Current Track. When BackTrack is selected, the i-Pilot Link will mark a Start
Point at the boat's current position and navigate to the last recorded track point. It will then create a saved iTrack on top of the
Current Track (up to 2 miles).
WARNING! Watch for a turning propeller and be prepared for boat movement when working with iTracks. If Prop Auto On is turned
on, the propeller will automatically turn on when an iTrack is engaged, even if the engagement is accidental. A turning propeller
can cause injury.
NOTE: You can activate BackTrack on the Current Track. BackTrack is not available on saved tracks or when Follow the Contour
is active.

Adjust the BackTrack Distance

The control head allows you to BackTrack up to 2 miles. To adjust the distance, use the following instructions.
1. Main Menu: Press the MENU key twice. Select the Accessories tab.
2. Select i-Pilot Settings. Press the RIGHT Cursor key.
3. Select BackTrack Distance.
4. Press the RIGHT or LEFT Cursor keys to adjust the setting.

Start BackTrack Navigation

To use BackTrack, the control head must be actively tracking. Once BackTrack navigation starts, you can also use iTrack features,
including Reverse (see the iTracks section for more information).
1. Press the GO TO key.
2. Select BackTrack. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the iTrack position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
NOTE: If BackTrack is not displayed in the Go To Menu, confirm tracking is enabled (Main Menu > Nav tab > Current Track > Start
Tracking).
Cancel Navigation (Disengage)
1. Press the GO TO key.
2. Select Cancel Navigation.
3. Press the RIGHT Cursor key.