Start Navigation To A Saved Waypoint Or Position - Humminbird i-PILOT LINK Operation Manual

Start Navigation to a Saved Waypoint or Position

If a saved waypoint is within 1/4 mile of the boat position, you can start i-Pilot Link navigation towards it.
1. Use the Cursor Control key to move the cursor to a waypoint or position on the chart.
2. Press the GO TO key twice.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the waypoint position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
cursor depth
cursor
digital
readouts
Starting Navigation to the Cursor Position
cursor position
destination waypoint
Move the Cursor
distance to cursor position
selected waypoint
Press Twice to Start
Navigation
bearing to cursor position