Start Autopilot Based On The Motor’s Heading; Start Autopilot Towards The Cursor Position - Humminbird i-PILOT LINK Operation Manual

Start AutoPilot Based on the Motor's Heading
When you start AutoPilot navigation without the cursor, the heading is based on the trolling motor's heading. AutoPilot continues
to navigate the boat in the same direction.
1. Press the GO TO key.
2. Select AutoPilot. Press the RIGHT Cursor key.

Start AutoPilot Towards the Cursor Position

Use the cursor to set the heading for AutoPilot navigation. i-Pilot Link will start navigation and maintain a constant heading towards
the cursor position.
1. Use the Cursor Control key to move the cursor to a position on the chart.
2. Press the GO TO key.
3. Select AutoPilot. Press the RIGHT Cursor key.
advanced AutoPilot mode
AutoPilot Navigation to the Cursor Position
track (red line)
Move the Cursor
Open the
GO TO Menu
autopilot
heading
(purple line)
boat
heading
(green
line)