Configure I-Pilot Link With The Control Head; Open The I-Pilot Settings Menu; Enable I-Pilot Link Navigation - Humminbird i-PILOT LINK Operation Manual

C -P
ONFIGURE I
Use the instructions in this section to set up i-Pilot Link on the HELIX control head.
1

| Open the i-Pilot Settings Menu

Use the i-Pilot Settings menu to enable i-Pilot navigation and configure the i-Pilot with the control head.
1. Main Menu: Press the MENU key twice. Select the Accessories tab.
2. Select i-Pilot Settings.
3. Press the RIGHT Cursor key.
2

| Enable i-Pilot Link Navigation

To use the i-Pilot Link with the control head, the i-Pilot Navigation menu must be turned on. When i-Pilot Navigation is turned on,
the related i-Pilot Link menus will be added to the menu system. If i-Pilot Navigation is turned off, the control head will operate with
its traditional Humminbird navigation features.
NOTE: If i-Pilot Link is connected during navigation, navigation will automatically be canceled.
Enable i-Pilot Link Navigation
1. From the i-Pilot Settings menu, select i-Pilot Navigation.
It may take a moment for the control head to detect the i-Pilot Link and display the i-Pilot Settings menu.
2. Select On.
L
ILOT INK WITH THE
C H
ONTROL
Enabling i-Pilot Navigation
EAD