Adjust The Heading; Adjust The Autopilot Heading - Humminbird i-PILOT LINK Operation Manual

Adjust the Heading

Use the i-Pilot X-Press Remote to adjust the heading during AutoPilot navigation.
NOTE: After steering to a new direction, there is a short delay before the direction is locked in to allow the compass to stabilize.
When broad speed changes are made, the motor heading may change slightly. This is normal.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the waypoint position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Adjust the AutoPilot Heading

1. Press the POWER key.
2. Confirm the Steer/Prop menu is selected.
3. Press the RIGHT or LEFT Cursor keys.
propeller On
Changing the Heading
Open Steer