Fujitsu ETERNUS DX60 S4 Configuration Manual page 12

Safety Precautions
WARNING
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Do Not
• Do not handle the power plug with wet hands. Doing so may cause electric
shock.
• Do not wind power cords too tightly at the root of the power cord. Doing so
stresses the cords and may expose or snap the inner wires, which can lead to
electric shock or fire.
• Do not damage or modify the power cord or the power plug. Heating, forced
bending, twisting, pulling, or placing heavy objects on the power cord or the
power plug will damage it, causing electric shock or fire.
• Do not plug all the power cords into a single outlet. Doing so may cause
electric shock or fire.
• Do not use a power cord that does not satisfy the specifications of the power
synchronized unit and the AC sensor unit. Doing so may cause electric shock,
fire, or device failure.
• Do not use any products other than the optional products for the power
synchronized unit. Doing so may cause electric shock, fire, or device failure.
• Do not insert or drop foreign objects such as metals or flammable objects into
openings in the power synchronized unit such as air vents. Doing so may
cause electric shock, fire, or device failure.
• Do not obstruct the openings in the power synchronized unit such as air vents.
Doing so may cause overheating that leads to fire and device failure.
• Do not use any flammable type cleaning sprays. Doing so may cause fire or
device failure.
Do
• Use only power sockets that have a ground. Failure to do so may cause electric
shock, fire, or malfunction.
• Disconnect the power plug from the socket during thunderstorms. Failure to
do so may lead to electric shock, fire, or device failure.
• Ensure the power plug is fully inserted into the socket. Failure to do so may
cause electric shock or fire.
12
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0