Fujitsu ETERNUS DX60 S4 Configuration Manual page 10

Safety Precautions
■ Instructions for installation
WARNING
CAUTION
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Do Not
• Do not place the power synchronized unit in an area with bad ventilation or
where anything that may cause a fire, or flammable gases are generated.
Doing so may cause a fire and damage the power synchronized unit.
• Do not place the power synchronized unit in locations subject to oil smoke,
steam, humidity and dust, or in places where the power synchronized unit
may come into contact with water. Doing so may lead to electric shock, fire,
and/or damage the power synchronized unit.
• Do not place any objects containing water such as vases and cups on or near
the power synchronized unit. Doing so may cause water to get into the power
synchronized unit and lead to electric shock, fire, and/or damage the power
synchronized unit.
• Do not place the power synchronized unit on an unstable floor. Doing so may
cause the power synchronized unit to fall, resulting in injury or damage to the
power synchronized unit.
• Do not connect power cords or any other cables to the power synchronized unit
during thunderstorms. Doing so may lead to electric shock and/or fire.
Unplug
• When the power synchronized unit is installed or moved, disconnect the power
plug from the socket. Remove all the connected cables. Watch your step during
the operation. Not doing so may damage the power cords and cause electric
shock or fire. Failure to do so may also cause the power synchronized unit to
fall and injure others.
Do Not
• Do not use the power synchronized unit in an area affected by corrosive gas or
in a salty environment. Doing so may cause device failure.
• Do not knock or place heavy objects on the power synchronized unit or
optional products. Doing so may cause injury or damage the power
synchronized unit.
10
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0