Cli Settings - Planet WAP-500N User Manual

The page includes the following settings:
Object
• Schedule Name
• Service
• Day
• Time of Day
• Add
• Cancel

4.6.9 CLI Settings

The command line interface (CLI) allows user to access the device through a command console, modem or
Telnet connection for configuration.
Click "Management
The page includes the following settings:
Object
• CLI
• Save/Apply
• Cancel
Description
Enter the description of the schedule service.
Select the type of schedule service, either Wireless Power ON or
Wireless Power OFF.
Select the days of the week to enable the schedule service.
Set the start time that the service is active.
Click Add to append the schedule service to the schedule service table
Click Cancel to discard changes.
CLI Settings" to enable/disable CLI.
Figure 4-48 CLI Settings
Description
Select ON/OFF to enable or disable the ability to modify the device via a
command line interface.
Click Save/Apply to apply all changes.
Click Cancel to cancel the settings.
User Manual of WAP-500N/WBS-500N
-70-