Wireless Mac Filter; Figure 4-38 Wireless Mac Filter - Planet WAP-500N User Manual

4.5.4 Wireless MAC Filter

Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC
addresses. You can manually add a MAC address to restrict the permission to access the device or refer to addresses. You can manually add a MAC address to restrict the permission to access the device or refer to addresses. You can manually add a MAC address to restrict the permission to access the device or refer to
section 5.2.3 to kick the associated client from the wireless client list. to kick the associated client from the wireless client list.
Click "Wireless Wireless MAC Filter
The page includes the following settings includes the following settings:
Object
• ACL Mode
• Add
• #
• MAC Address
• Delete
• Accept
MAC Filter" to configure the wireless access control settings. to configure the wireless access control settings.

Figure 4-38 Wireless MAC Filter

Description Description
Determines whether network access is granted or denied to clients whose Determines whether network access is granted or denied to clients whose Determines whether network access is granted or denied to clients whose
MAC addresses appear in the MAC Address table on this page. MAC addresses appear in the MAC Address
option includes Disable, Deny MAC in the list, or Allow option includes Disable, Deny MAC in the list, or Allow MAC in the list.
Enter the wireless MAC address of the client in front of the Enter the wireless MAC address of the client in front of the Add button
and then c and then click Add to add the new entry to the MAC filtering list.
Displays the sequence number of the entries. Displays the sequence number of the entries.
Displays the MAC Address that will be denied/allowed Displays the
device. device.
Click Delete to remove the entry from the list. Click
Click Accept to apply the setting. Click
User Manual of WAP
add the new entry to the MAC filtering list.
denied/allowed access to this
-60-
WAP-500N/WBS-500N
table on this page. The