Using The Rugby In The Laying Down Position - Leica Rugby 55 User Manual

4.2
Applications

Using the Rugby in the Laying Down Position

• Place the Rugby in the laydown position
• Press the On/Off Power Button to turn on the
Rugby. The Rugby will always turn on in automatic
mode. Allow the Rugby to self-level.
• Press the Head Speed Button to stationary mode,
0-rps. The beam will move the the plumb down
position for alignment over your reference marks.
• Start the head rotation or scanning motion to
rough align the beam to a second control point.
• Using the buttons on the laser or the remote, fine
adjust the beam until striking the second control
point.
• Once aligned, the split beam and rotating beams
can be used to locate 90° angles for layout. The
rotating beam also creates a vertical plane for
transferring points from the floor to the ceiling.
Rugby 55 4-3