Leica Rugby 55 User Manual page 16

Basic Operation
Scan-90 and Scan-Memory
• Press and hold either the CW or CCW button, then press the
+
Scan or Head Speed Button to quickly move the scanning or
stationary beam at 90° intervals. In scan mode, the scan
width will automatically change to the smallest scan width
when this function is activated.
+
• For layout work, use the Beam Down feature (a) to position
the beam over a reference point. Then, use the Scan-90
feature (b) to quickly move the small scan to a position to the
left or right of the laser.
• For ceiling applications and marking elevations, the Scan-90
feature can quickly bring the scanning beam to you.
b
• Scan Memory means that you can switch to rotational or
stationary mode and the scan will return to the previous posi-
tion wheh scanning motion is again chosen.
a
Rugby 55 2-7