Alert
Troubleshooting
Symptom
The IR Remote is not
working
The laser receiver is
not functioning prop-
erly. (See also your
receiver manual)
Elevation alert func-
tion is not working.
The Rugby does not
turn on in automatic
mode.
Possible Causes and Solutions
Check for proper operation of the remote
•
Check that the Rugby is turned on.
•
The remote may be out side the usable distance.
•
Aim directly at the laser for maximum distance.
•
The remote's 9-volt battery may be low.
Check for proper operation of the receiver.
•
The Rugby is not rotating. It is leveling or in eleva-
tion alert.
•
The receiver is out of usable range.
•
The receiver's batteries are low.
The elevation alert function for the Rugby 55 is
normally disabled on units from the factory.
•
With unit turned on and rotating, press and hold
the LEFT and RIGHT arrow buttons, then press the
auto/manual button to enable or disable this func-
tion. The unit will beep once to indicate the
change.
The Rugby 55 is designed to always turn on in auto-
matic mode unless specifically disabled by the user.
Rugby 55
7-3