Your Leica Camera AG Test certificate REPLACEMENT PARTS / ACCESSORIES Contact Leica Customer Care or your specialist Leica retailer for The device uses an invisible laser beam. Please read the details on the latest replacement parts / accessory range: chapters “Safety Remarks” and “Important Information”...
Leica Camera AG intends to provide you with innovative and informa- tive documentation. Due to the amount of creativity that has gone LEGAL INFORMATION ABOUT THIS MANUAL into its design, we ask for your understanding that Leica Camera AG must protect its intellectual property, including patents, trademarks COPYRIGHT...
Page 4
TECHNICAL DATA (LASER) DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT Laser class IEC/EN Class 1 (Applies within the EU and for other European countries Wavelength (nm) with active waste separation policies.) Pulse duration (ns) Output (mW) This device contains electrical and/or electronic components which must not be disposed of in general household waste.
• The use of any operations not described in this manual or any • Do not attempt to disassemble, reassemble or repair the Leica alterations on the device may result in hazardous radiation expo- Rangemaster yourself. Emitting laser radiation may pose a serious sure.
IMPORTANT INFORMATION BATTERY • Only the battery type stated and described in this manual must be used. Any improper use of the batteries or the use of unapproved GENERAL INFORMATION battery types may result in an explosion! • Do not attempt to take the device apart yourself. Repairs must •...
Page 7
• Regardless of whether this information is used, you are responsi- ble for assessing the relevant hunting situation. • Leica Camera AG does not accept liability for the accuracy of values transmitted from third-party devices. • Powerful electric fields, e.g. emanating from radar systems, may cause errors and/or faulty values.
Leica product with its article number and congratulations on the purchase of your new Leica product – you are now the proud owner of a serial number, and details about the Authorized Leica Dealer. We reserve the right to request world-class brand product.
PART DESIGNATIONS Menu Selection Button (meter/yard display), (equivalent horizontal range) eu.us Main button Switching the device ON/OFF Index for diopter setting Diopter scale Eyecup Eyepiece Strap lugs Battery compartment 3 V lithium cell (type CR2) Lens Laser transmission lens Target mark Display (value) PART DESIGNATIONS...
PREPARATION INSERTING/CHANGING THE BATTERY A cylindrical 3 V lithium cell (type CR2) is required for power supply. ATTACHING THE CARRY STRAP ▸ Turn the lid over the battery compartment in anti-clockwise di- rection ▸ Remove the lid ▸ Thread the small loop of the carry strap through the strap lug ▸...
Turn the eyecup until the target mark is in sharp focus • Check the set value on the diopter scale. ▸ Fold eyecup down (Fig. Caution Never look directly at the sun or other bright sources of light through your Leica optics! Doing so may seriously damage your eyes. PREPARATION...
SETTINGS AND OPERATION SELECTING SETTINGS ▸ Press the main button repeatedly (<2 s each time) until the desired menu item appears ACTIVATING THE RANGEFINDER • The selected setting is initially lit continuously as confirmation, ▸ Press the main button then the display switches to the next menu item and then dis- appears if no further settings are made.
Page 14
SETTING THE UNIT OF MEASURE The device can be set to imperial units of measure ( ) or metric units of measure ( ▸ Press and hold the menu selection button • appears. eu.us ▸ Press the main button several times briefly until the desired set- ting appears ...
MEASUREMENT RANGEMASTER CRF R SCAN MODE (OBJECT TRACKING) DISTANCE MEASUREMENT MADE EASY ▸ Press the main button briefly ▸ Aim the target mark at the object ▸ Press the main button again • The target mark disappears briefly and the measured value is displayed.
Press the menu selection button briefly Object structure homogeneous inhomogeneous Note (house wall) (underbrush, tree) • values are provided only between 10 m and 1100 m for safety reasons. Beyond that, only the actually measured, linear range is provided. MEASUREMENT RANGEMASTER CRF R...
CARE/CLEANING TECHNICAL DATA • Your Leica rangefinder requires no special care. Designation Leica Rangemaster CRF R • Coarse dirt particles like sand can be removed with a soft brush Device type Rangefinder Type No. 4032 or simply blown off. Order No.
LEICA CUSTOMER CARE Please contact the Customer Care department of Leica Camera AG for the maintenance of your Leica equipment and for help and advice regarding Leica products and how to order them. You can also con- tact the Customer Care department or the repair service provided by your regional Leica subsidiary for repairs or warranty claims.
Need help?
Do you have a question about the RANGEMASTER CRF R and is the answer not in the manual?
Questions and answers