Receiver; Pairing The Rod Eye 180 With The Rugby 820/840 - Leica Rod Eye 180 User Manual

Table of Contents

Description

4.1

Pairing step-by-step

Rod Eye 180, Receiver

Receiver

The Rugby 820/840 is sold with the Rod Eye 180 Digital RF Receiver. Using the

Rugby 820/840 together with the Rod Eye 180 enables the user to perform special

functions such as automatic slope catching and monitoring, as well alignment of the

vertical plane for batter boards and facade applications (Rugby 840).

Additional information on the Rod Eye 180 Digital RF Receiver can be found in the

individual user manuals also located on this CD.

The Rugby 820/840 and the Rod Eye 180 include radio devices that allow the user to

automatically match an existing grade.

When purchased together, the Rugby 820/840 and Rod Eye 180 have been paired

together at the factory. If purchasing a second receiver, the Rugby 820/840 and the

Rod Eye 180 must first be paired together to be able to communicate with each other.

Step

Description

Turn off the Rugby and the Rod Eye 180.

Press and hold the Power button on the Rugby for 5 seconds to turn on the

Rugby in pairing mode. The Rugby beeps five times.

Press and hold the Power button on the Rod Eye 180 for 5 seconds.



If successful, the X-axis LED and the Y-axis Indicator LED flash green and the

Rugby beeps five times quickly when the pairing was successful. Also the

green LED on the receiver will flash five times to indicate a successful

pairing.

If not successful, the X-axis Indicator LED and the Y-axis Indicator LED flash

red five times quickly if the pairing was not successful. Also the red LED on

the receiver will flash five times to indicate an unsuccessful paring.

Table of Contents