Leica Rugby 55 User Manual page 47

X
Accuracy Adjustment
Adjusting the Z-axis (vertical plane).
• Pressing the LEFT or RIGHT arrow buttons increments the laser beam's
vertical position. Each increment shall be indicated by a flash of the X-axis
LED and a beep from the audio indicator.
• Continue to press the buttons and monitor the spot until the unit is within
its specified range.
To Exit - Press and hold the Auto / Manual hidden button for three
seconds to exit adjustment mode and save the adjusted activity. The X-
axis and Y-axis LED's shall flash alternately three times each, then the
unit shall turn off.
Pressing the POWER button at any time while in adjustment mode shall
exit the mode without saving any changes.
Rugby 55 6-10