Leica Rugby 55 User Manual page 44

X
Accuracy Adjustment
Adjusting the X-axis.
• Pressing the LEFT or RIGHT arrow buttons increments the laser beam up
and down. Each increment shall be indicated by a flash of the X-axis LED
and a beep from the audio indicator.
• Continue to press the buttons and monitor the spot until the unit is within
its specified range.
Press the Auto/Manual button to switch to the Y-axis.
1. The X and Y-axis LED's shall flash alternately three times each.
2. The Y-axis LED will flash three times, then flash slowly until level.
3. The X-axis LED will be off.
4. When leveled, the Y-axis LED will turn ON (not blinking).
X
Rugby 55 6-7