The Wall Mount - Leica Rugby 55 User Manual

3.2
b
Accessories

The Wall Mount

The Wall Mount Bracket Assembly
• Allows the user to mount the Rugby on a wall grid at the necessary height.
The rotating beam then provides a reference height to hang the ceiling
grid.
• Mount the Rugby to the wall mount and tighten the locking knob (a).
• Mount the Wall mount to the ceiling grid and tighten the locking mecha-
nism (b).
c
• To adjust the height, loosen the adjustment knob (c) on the side of the
bracket, then slide the bracket up or down until the desired height is
achieved. Retighten the adjustment knob.
a
• A 5/8"-11 mounting hole is molded into the back of the bracket for using
the Rugby in the laying down position mounted on a tripod.
The Rugby 55 has also a 5/8"-11 mounting hole in the side of the housing to
allow the laser to be attached directly to a tripod or batter board clamp in the
laying down position.
The interior carrying case of the Rugby 55 is designed to allow the wall mount
to remain attached to the Rugby while in the carrying case. This reduces the
setup time and need to adjust the height of the bracket each time the Rugby
is used.
Rugby 55 3-4