The Ceiling Grid Target - Leica Rugby 55 User Manual

3.3
Accessories

The Ceiling Grid Target

The Ceiling Grid Target
• Allows the user to visually detect the rotating or scanning beam
throughout the jobsite.
• The ceiling grid target's magnet attaches to the ceiling grid.
• The beam can be viewed as it reflects off the foil on the back of the target,
or through the target at the sides of the foil.
• The ceiling grid can then be adjusted until the beam is hitting the center
line of the target.
• A small bracket on the back of the target allows the target to be set up
a ) over a control point for layout alignment (a).
Rugby 55 3-5