Leica Rugby 55 User Manual page 43

a
x
b
Accuracy Adjustment
In adjustment mode...
• The X-axis LED is used to indicate changes to the X and Z axes (a).
• The Y-axis LED is used to indicate changes to the Y axis (b).
To enter adjustment mode perform the following steps:
• Turn the power off.
• With power off, press and hold both the LEFT and RIGHT arrow buttons,
then press the ON button. The active axis is the X-axis (a).
y
• If done correctly, the following sequence of events will occur:
1. The X and Y-axis LED's will flash alternately three times.
2. The X-axis LED will flash three times, then flash slowly until level.
3. The Y-axis LED will be off.
4. When leveled, the X-axis LED will turn ON (not blinking).
Rugby 55 6-6