3.4
Accessories
The Batter Board Clamp
The Batter Board Clamp
•
The batter board clamp is a simple device that allows the Rugby to be
attached directly to the batter board for squaring of forms.
•
Attach the clamp to the 5/8"-11 mounting hole in the side of the Rugby.
•
Attach the batter board clamp to the form and position the laser beam
directly over your reference point.
•
The rotating beam and top plumb beam form a 90° reference for setting
the form.
•
Using the remote or the buttons on the Rugby, align either of the beams
to a second reference point. The second beam will be your 90° reference.
Rugby 55
3-6