Managing Information For A Scheduled Communication (Editing A Communication In Memory); Printing Out A Sample Image Of Waiting Documents - Xerox FAX System (J) Operation Manual

Section 3 Fax Operation (Various Functions)
Managing Information for a Scheduled Communication
(Editing a Communication in Memory)
You can modify certain information relating to a scheduled communication that uses the timer or even cancel the communication completely.
You can also print out a sample image of the corresponding documents as well as initiate (force-start) the communication without waiting for
the actually scheduled start time.
* If the scheduled communication begins automatically while you are in the middle of any editing operation, it will impossible to continue that
procedure.
Printing Out a Sample Image of Waiting
Documents
If you want to check the documents that correspond to a specific
transmission that is in memory and waiting for transmission, you
can print out a sample page of those documents.
* Even if you print out a sample image of the documents, the
transmission will be carried out on schedule.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Press the "Application" key. The Application screen will
appear.
(inch)
(metric)
2
Press the "Reserved TX status" key.
The content of the first schedule communication will be
displayed.
(inch)
(metric)
3-14
3
Use the " " and/or " " cursor keys to switch to the
communication that you want.
(inch)
(metric)
4
Press the "Print" key.
(inch)
(metric)
5
Press the "Yes" key. A sample image of the corresponding
documents will be printed out.