Combining Recorded Tracks; Combine Function - Sony CMT-M700DVD Operating Instructions Manual

Dividing recorded tracks (continued)
6
Press ENTER/YES on the remote again
if the point to be divided is correct.
If the point to be divided is incorrect, press
MD . or > on the remote to find the
point to be divided, then press ENTER/YES
on the remote.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 Stereo mode) or by
4-frame intervals (in LP4 Stereo mode).
Tip
To shift the point by minute or second intervals in
step 6 , press MD m or M on the remote
repeatedly to flash minute, second, or frame
indication, then press MD . or > on the
remote.
Minute
Note
If you divide a labelled track (page 47) into two
tracks, only the first track retains the track title.
Example:
1 2
A
1 2
A
GB
56
Second Frame
3 4
B C
3 4 5
B C
The new track is not labelled
Combining recorded
tracks

— Combine Function

You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
Example: Combining track 3 to track 1.
Track number
1
Original
A
tracks
1
After
A
COMBINE
Example: Combining track 1 to track 4.
1
Original
A
tracks
1 2
After
B
COMBINE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display "Edit Menu".
3
Press MENU + or – on the remote
repeatedly until "Combine?" appears,
then press ENTER/YES on the remote.
2 3 4
B C D
2 3
C B D
2 3 4
B C D
3
C D A
5
4