Ide Master, Ide Slave; Ide Master And Ide Slave - IEI Technology PPC-3708A-N270 User Manual

PPC-37xx-N270 Panel PC
SATA Only
SATA Pri, PATA Sec
PATA Only

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
The IDE Configuration menu (
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
5 .3.2.1 appear.
Section
6

5.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
Only the SATA drives are enabled.
The IDE drives are enabled on the Primary
D
EFAULT
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
B IOS Menu 4) allows changes to the configurations for the
6
Page 71