Omega cl310 User Manual page 95

download proceeds, a right angle bracket indicates the tag
presently being processed, and the status is displayed as
Loading. All tags not yet downloaded have status Pending. If a
tag can not be downloaded for some reason, an error message
is displayed explaining the problem and the tag status shows
FAILED. All successfully downloaded tags have status Loaded.
If the download is terminated with the Cancel button, any tags
already downloaded remain in the calibrator and must be erased
separately if needed.
Once the download is complete, the download status display
remains on the screen for review. Click the OK button to dismiss
it.
9.8 Configure Menu
Tag
Initially CL310-SW is set to store tags and groups in the root
folder 'Omega CL310-SW' within the 'My Documents' folder. If
you wish to store them into another folder, navigate to the
alternate folder before saving the first tag or group. From then
on, until a further alternate folder is chosen, that folder will be the
default for storage.
New
Create a new tag configuration. A dialog screen with the tabs
Identification, Instrument Input, Instrument Output, Tolerance,
and Test Points is displayed for entry of the configuration data.
This dialog screen is described in detail in section 9.9 below.
When complete, the configuration is saved into a user named file
with the fixed extension UTG.
Edit
Edit an existing tag configuration. After a tag configuration file is
selected, a dialog screen with the tabs Identification, Instrument
Input, Instrument Output, Tolerance, and Test Points is displayed
for modification of the configuration data. This dialog screen is
described in detail in section 9.9 below. When complete, the
configuration is saved into a user named file with the fixed
extension UTG. This may be the original file name or a new one.
Extract from Report
Extract a tag configuration from a previously uploaded and
saved report file. If the selected file contains multiple tags, a list
is displayed for selection of the single tag to be extracted. Once
the tag is selected, or directly if the report file contained a single
91