Omega cl310 User Manual page 26

4. Select the desired thermocouple type from the sensor types.
5. Enter the temperature using the keypad.
Figure 14. Connections for Outputting RTDs
4.9 Sourcing Ohms/RTDs
To source an RTD, follow these steps:
1. Select lower display from the Main Menu, and choose [RTD]
from the primary parameters.
2. Choose output [OUT] from the input/output control, and select
RTD type from the sensor types.
3. Connect the calibrator to the instrument being tested, as in
Figure 14.
4. Enter the temperature or resistance using the keypad.
Figure 15. Using a 3- or 4-wire Connection for RTDs
22