Table of Contents
Advertisement
Command
LOCKOUT
OUT?
PRES?
PULSE_CNT?
RTD_TYPE?
RTD_WIRE?
SIM?
TAGS?
TC_TYPE?
TEMP_UNIT?
TRIG?
TSENS_TYPE?
Description
Returns user to manual operation of the calibrator
Locks out the keypad of the calibrator, and allows for
remote operation only
Sets the mode for measuring on the lower display.
Sets the pressure unit on the lower display
Sets the output of the calibrator
Returns the output of the calibrator
Returns the model and serial number of the attached
pressure module
Returns the pressure unit for the upper and lower dis-
play
Sets the number of pulses for the pulse train
Returns the number of pulses in the pulse train
Puts the calibrator in remote mode
Sets the RTD type
Returns the RTD type
Sets the number of wires used by the RTD mode.
Returns the wire number setting used in the RTD mode
Set calibrator clock
Sets the output for mA simulation
Returns the output of the mA simulation
Clear test data for a specified tag
Clear test data for all tags
Download tag calibration test configuration data from a
PC to the calibrator
Upload tag calibration test results to a PC from the cali-
brator
Upload a list of all tag iD's to PC
Sets the thermocouple type
Returns the thermocouple type
Sets input/output temperature unit for RTD and TC
Returns the temperature unit for RTD and TC
Starts and stops the pulse train in pulse mode
Returns TRIGGERED when a pulse train is on. Returns
UNTRIGGERED when the pulse train is off.
Sets temperature sensor type.
Returns temperature sensor type
37
- Quick Links:
- Calibrator Interface
- Rtd_Type
- Specifications
Hide quick links:
Advertisement
Table of Contents
