Table of Contents
Advertisement
Quick Links
MADE IN
®
®
MADE IN
Thermocouple Source
Thermocouple Source
Thermocouple Source
CL540A
CL540A
CL540A
e-mail: info@omega.com
For latest product manuals:
CL540ZA
CL540AZ
CL540AZ
CL540ZA
CL540AZ
User' s Guide
User' s Guide
Shop online at
Shop online at
omega.com
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
omegamanual.info
CL540A
CL540A
CL540A
and
and
CL540AZ
omega.com
and
Advertisement
Table of Contents
Related Manuals for Omega CL540ZA
Summary of Contents for Omega CL540ZA
- Page 1 User’ s Guide MADE IN MADE IN ® ® CL540A CL540A CL540A Shop online at Shop online at omega.com omega.com e-mail: info@omega.com e-mail: info@omega.com For latest product manuals: For latest product manuals: omegamanual.info omegamanual.info CL540ZA CL540AZ CL540AZ CL540A CL540A CL540A...
-
Page 3: Product Description
Product Description • Easy to use With the CL540A/CL540ZA you can check & calibrate all your thermocouple instruments. • Take it without into the shop, plant or field Carry it without worry - protect it with an optional rubber boot and rugged, low profile switches. -
Page 4: Basic Operation
J T E K R S B N G C D L U P m V Press and hold the knob for two seconds to store desired HI/LO points in SOURCE mode. SOURCE Double click the knob to get into the Omega CL540A/CL540ZA Configuration Mode. Use configuration to select °C or °F, T/C Type Push &... -
Page 5: Temp Units
Setup Double click the DIAL KNOB at any time the CL540ZA: pressing the knob will cycle through unit is on and the following displays will appear T/C types J, T, E, K, R, S, B, N, G, C, D, L for 15 seconds: (J-DIN), U (T-DIN), Platinel II and mV. - Page 6 Sourcing Thermocouple SOURCE Choose this function to provide a simulated thermocouple signal into controllers, temperature transmitters, indicators or any input devices that measure thermocouple sensors.. 1) Disconnect the thermocouple sensor from the device to be calibrated. 2) Select “SOURCE” with slide switch 3) Connect a thermocouple wire (matching the type THERMOCOUPLE SOURCE of wire to sensor being simulated) with miniature...
-
Page 7: Specifications
This product is calibrated on equipment traceable to NIST and includes a Certificate of Calibration. Test Data is available for an additional charge. OMEGA ENGINEERING, INC. recommends a calibration interval of one year. Contact your local representative for recalibration and repair services. - Page 8 Ranges & Accuracies Degrees C Accuracy Degrees F Accuracy ISA/ANSI Type Range Range Material Color -200.0 to -180.0 ±0.5° -346.0 to -292.0 ±0.9° +Iron White -Connstantan -180.0 to -50.0 ±0.4° -292.0 to -58.0 ±0.7° Jacket Black -50.0 to 500.0 ±0.3° -58.0 to 932.0 ±0.5°...
- Page 9 Ranges & Accuracies Degrees C Accuracy Degrees F Accuracy ISA/ANSI Type Range Range Material Color -230.0 to -180.0 ±1.2° -382.0 to -292.0 ±2.2° +Nicrosil Orange -Nisil -180.0 to -50.0 ±0.7° -292.0 to -58.0 ±1.3° Jacket Orange -50.0 to 1100.0 ±0.4° -58.0 to 2012.0 ±0.7°...
- Page 10 Accessories Included: Part Number Four “AA” Alkaline batteries, Certificate of Calibration mV Wire Kit 020-0207 1 Red & 1 Black Lead with Retractable Shield Banana Plugs & Alligator Clips Optional Accessories: Part Number Rubber Boot HH500A-RB Small Carrying Case (fits unit with or without boot) SC-HH500 Ni-MH 1 Hour Charger with 4 Ni-MH AA Batteries 020-0103...
- Page 12 European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.